Docs

User Guide

User Guide / Sequences

Inbound Lead Routing

Automatically route inbound Salesforce Leads into the appropriate sales rep's sequence in Rox.

Inbound lead routing uses the Lead Owner assigned in Salesforce to determine which rep should receive each Lead. Once configured, Rox synchronizes new Leads from a Salesforce list view and automatically enrolls them in the corresponding owner's sequence.

This workflow helps teams manage inbound outreach without manually assigning prospects or enrolling each new Lead.

Before you begin

Inbound lead routing must be configured by a Rox administrator.

Before setting up the workflow, confirm that:

  • Your organization has connected Salesforce to Rox and enabled Lead synchronization.

  • You have connected your personal Salesforce account to import Salesforce list views.

  • Each SDR who will receive inbound Leads has a Rox user account.

  • Each SDR will receive their own copy of the inbound sequence through a user profile.

The Salesforce Lead Owner must be mapped to a Rox field of type User reference. This mapping allows Rox to identify the appropriate sequence owner.

1. Configure inbound lead routing

Set up your Salesforce list view and connections

  1. Create a Salesforce Lead list view. In Salesforce, create a list view that captures incoming Leads. You can optionally include additional properties, such as lead scores or signals. These can also be mapped and added to your Rox list later. Make sure you own the Salesforce list view.

  2. Connect your organization's Salesforce account. In Rox, go to Settings → Integrations → Salesforce and connect Salesforce at the organization level. Confirm that Leads are included in the synchronization.

  3. Map the Salesforce Lead Owner field. In the Salesforce integration settings, open Field mapping → Leads.

    • Map Salesforce Lead Owner (OwnerId) to a Rox Lead field of type User reference. This field type is required for owner-based routing.

    • Map any additional Salesforce fields you want to use in the imported list.

  4. Connect Salesforce (Personal). Connect your personal Salesforce account under Settings → Integrations. This connection allows Rox to access and import the Salesforce list views available to your user.

For more information, see Configuring Salesforce Integration + Writeback and Import Salesforce list views.

Set up your sequence

  1. Create the inbound sequence. Go to Sequences → New sequence. Give the sequence a recognizable name, such as Inbound Demo Requests, and configure its outreach steps, messaging, and send settings.

  2. Create a user profile. Go to Settings → User profiles. Create a profile and add the inbound sequence under Sequences. Save the profile.

  3. Assign the profile to your SDRs. Navigate to Settings → Members, select the reps who should receive inbound Leads, choose Apply profile, and confirm.

  4. Verify sequence availability. Confirm that every rep who will receive routed Leads has a Rox user account and their own copy of the source sequence.

You can reapply the profile as you onboard additional users.

Important: Routing requires each Lead Owner to have a corresponding Rox user account and a copy of the selected source sequence. Without both, Rox cannot enroll the Lead in that owner's sequence.

Set up your Lead list

Import the Salesforce list view

  1. Open People and select Import → Import from Salesforce.

  2. Select Leads, then choose the Salesforce list view you created.

  3. Enter a name for the Rox list.

  4. Enable Keep in sync.

  5. Select Import list.

  6. Open the imported list and confirm that the expected Leads and fields are present.

Keeping the list in sync allows Rox to detect new Leads entering the Salesforce list view.

Add the Owner column

  1. Open the imported Lead list.

  2. Select Add column.

  3. Add the existing Lead field mapped from Salesforce Lead Owner.

  4. Check a sample row to confirm that the field identifies the intended Salesforce owner.

This column is used to determine which rep should receive each Lead.

Configure automatic sequence enrollment

  1. From Add column, select Add leads to sequence to open Automatically push to sequence.

  2. Under Select Sequence, choose the source sequence you added to the user profile.

  3. In the Owner picker, select the mapped Lead Owner column. Rox uses this field to route each Lead to the appropriate rep's copy of the sequence.

  4. Under Input Mappings, configure the fields required to identify the Lead and its company:

    • Lead identification: Map Email or LinkedIn URL.

    • Company identification: Map Company Name or Company Domain.

Each Lead must have a populated value from both required groups.

  1. Review any automatically populated mappings and add other fields required by your sequence steps.

  2. Optionally, under Run Settings, configure a Run Condition if only certain Leads should be enrolled. Leave this blank to enroll every eligible Lead in the list.

  3. Open Save sequence flow and select Run All.

Rox will evaluate existing Leads in the list and automatically process new Leads as they enter the synchronized list.

2. What to expect after setup

Once configured, inbound lead routing runs automatically.

New Salesforce Leads are imported into Rox, resolved in the knowledge graph, and enrolled in the appropriate owner's sequence when their records are ready.

How synchronization works

Routing involves several stages:

  1. Salesforce list synchronization. Rox checks the imported Salesforce list for new Leads. Rox checks the imported Salesforce list for new Leads approximately every 15 minutes.

  2. Knowledge graph resolution. Newly detected Leads may initially appear as gray, pending rows while Rox resolves their records. The guide describes graph synchronization as occurring roughly every 30 minutes.

  3. Sequence enrollment. Once the Lead is ready, Rox evaluates its Owner field, required input mappings, and any configured run conditions before enrolling it in the corresponding sequence.

These stages do not necessarily complete at the same time. A Lead may appear in the imported list before becoming eligible for sequence enrollment.

Automatic sequence processing typically occurs within 15–60 minutes, averaging approximately 30 minutes. End-to-end routing time depends on the synchronization stages involved.

Understand routing statuses

The Status column in the imported Lead list indicates the result of sequence enrollment.

Status

Meaning

What to do

Added to Sequence

The Lead was successfully enrolled.

No action required.

Unknown owner

The Lead Owner is blank or cannot be matched to a Rox user.

Verify the Salesforce assignment, mapped Owner field, and Rox user account.

Owner has no Sequence

The owner does not have a copy of the selected source sequence.

Check the user's profile assignment and sequence availability.

Didn't meet criteria

The Lead is missing a required input or did not satisfy the configured run condition.

Review the Lead's data, input mappings, and run settings.

After correcting an issue, rerun the affected Status cell from the list.

Rerunning Leads already marked Added to Sequence or Already in Sequence does not enroll them again.

3. How inbound lead routing works

The routing flow follows three stages:

Salesforce → Rox People List → Owner's Sequence

For example, suppose Jordan Lee submits a demo request and Salesforce assigns the Lead to an SDR.

  1. The Lead enters Salesforce: Jordan's record appears in the Salesforce Inbound Demo Requests Lead list view.

  2. Rox imports the Lead: The synchronized People List detects Jordan's record. Once the Lead is resolved and passes the configured checks, Rox reads the Salesforce Lead Owner field.

  3. Rox enrolls the Lead in the correct sequence: Jordan is automatically added to the assigned SDR's copy of Inbound Demo Requests. The SDR does not need to enroll the Lead manually.

  4. The SDR begins outreach: The rep opens their sequence in Rox, finds Jordan under Prospects, and completes any required manual tasks. Automated steps follow the sequence's configured send settings and schedule.

If a Lead does not appear in the expected sequence, first verify that the record belongs to the correct Salesforce list view and has the intended owner.

4. For SDRs: Work your inbound leads

Once your administrator has configured inbound lead routing, new Leads assigned to you in Salesforce are automatically enrolled in your copy of the inbound sequence.

Review and work new Leads

  1. Open Sequences in Rox.

  2. Find and open your assigned inbound sequence.

  3. Review newly enrolled Leads under Prospects.

  4. Open Tasks to complete any manual phone, email, or other outreach steps.

  5. Automated steps execute according to the sequence's configured send settings and schedule.

You do not need to import Leads or enroll them manually once the routing workflow is configured.

What if a Lead is missing?

If an expected Lead does not appear in your sequence:

  1. Confirm that the Lead is assigned to you in Salesforce.

  2. Verify that the Lead belongs to the Salesforce list view used for inbound routing.

  3. Allow time for the Salesforce list and knowledge graph synchronization stages to complete.

  4. If the Lead is still missing, ask your Rox administrator to check the imported list's Status column.

Your administrator can verify that the Owner field is mapped correctly, your Rox user account is recognized, and you have a copy of the source sequence.

Rox is committed to the privacy and security of its users. Customer data processed through the Rox platform is encrypted in transit and at rest using AES-256 encryption and is never used to train generalized machine learning models. Rox maintains SOC 2 Type II compliance and undergoes independent third-party security audits on an annual basis. All AI-generated outputs, including but not limited to prospect recommendations, message drafts, meeting summaries, and pipeline scoring, are provided for informational purposes and should be reviewed by authorized personnel before any action is taken. Performance metrics referenced on this website, including pipeline generation figures, response rates, and revenue impact, reflect results reported by individual customers under specific configurations and may not be representative of all deployments. Actual results will vary based on factors including but not limited to data quality, CRM configuration, outreach volume, market conditions, and target audience. Rox does not guarantee specific revenue outcomes. The Rox platform integrates with third-party services including Salesforce, HubSpot, Gmail, Microsoft Outlook, Slack, and others; availability and functionality of third-party integrations are subject to the respective providers' terms of service and may change without notice. Features described as "autopilot," "autonomous," or "automated" operate within user-defined parameters and require initial configuration and ongoing oversight. Rox, the Rox logo, and "Revenue on Autopilot" are trademarks of Rox Data Corp. All other trademarks are the property of their respective owners. Service availability is subject to the terms outlined in your enterprise agreement. For questions regarding data processing, compliance certifications, or platform capabilities, contact security@rox.com.

Rox is committed to the privacy and security of its users. Customer data processed through the Rox platform is encrypted in transit and at rest using AES-256 encryption and is never used to train generalized machine learning models. Rox maintains SOC 2 Type II compliance and undergoes independent third-party security audits on an annual basis. All AI-generated outputs, including but not limited to prospect recommendations, message drafts, meeting summaries, and pipeline scoring, are provided for informational purposes and should be reviewed by authorized personnel before any action is taken. Performance metrics referenced on this website, including pipeline generation figures, response rates, and revenue impact, reflect results reported by individual customers under specific configurations and may not be representative of all deployments. Actual results will vary based on factors including but not limited to data quality, CRM configuration, outreach volume, market conditions, and target audience. Rox does not guarantee specific revenue outcomes. The Rox platform integrates with third-party services including Salesforce, HubSpot, Gmail, Microsoft Outlook, Slack, and others; availability and functionality of third-party integrations are subject to the respective providers' terms of service and may change without notice. Features described as "autopilot," "autonomous," or "automated" operate within user-defined parameters and require initial configuration and ongoing oversight. Rox, the Rox logo, and "Revenue on Autopilot" are trademarks of Rox Data Corp. All other trademarks are the property of their respective owners. Service availability is subject to the terms outlined in your enterprise agreement. For questions regarding data processing, compliance certifications, or platform capabilities, contact security@rox.com.